CRC 2.26 Lubricant Spray 360gm
| Description: | CRC 2.26 Lubricant Spray |
|---|---|
| Stock Code: | CRC2.26 |
| Price: | NZD$23.90 |
CRC 2.26
Plastic safe lubricant, penetrant and corrosion inhibitor that helps prevent electrical malfunctions caused by water penetration, humidity, condensation or corrosion.
Displaces moisture, seals out moisture, prevents corrosion, cleans, lubricates, penetrates.
Prevents 80% of all electrical failures. (Most electrical failures are caused by moisture or corrosion).
Features
- Restores flood and water damaged equipment.
- 25-50 microns will give lubrication equivalent to a 10 weight motor oil.
- High capillary action and low surface tension, gives great penetrating qualities to break through corrosion.
- Protects by sealing out moisture to prevent corrosion.
- The solvent system in 2.26 will degrease and remove light soils and contaminants.
- Extremely low flashpoint.
- Improves electrical properties in higher voltage applications.
Approvals
- NZFSA Approved C14
- USDA Authorised for use in Federally inspected Meat and Poultry Plants.
- MIL Specs: Mil - C-81309C Type 111; W-P-216B; O-W-1284B; NSN 6850-00-874-5847
NSN 6850-98-106 4647 Aerosol
NSN 6850-98-106 2693 bulk - Conforms to Aust Defence Spec 1002-PX112
- Certificate of inspection for use in NSW Coal Mines
Physical Properties
| Flash Point; Flash Point Dry Film (Open Cup) | 80°C; 235°C |
| Heat Resistance Film degradation begins at: | 150°C |
| Distillation Range | 76-365°C |
| Specific Gravity | 0.8167 ± 0.02 |
| Dielectric Strength | 42,000 volts per ASTM #D.877 |
| pH | 6.0 to 7.0 |
| Viscosity (20°C) | 4cP |
| Lubrication (Falex) | Up to 1750 lbs |
| Average film thickness | 1 to 2 Microns |
| Expected coverage | 1 to 2 Microns |
