Enternabond Eterna Prime
| Stock Code: | RVO699 |
|---|---|
| Price: | NZD$89.50 |
EternaPrime is specially formulated primer developed specifically for EternaBond tapes. EternaPrime, based on a VOC exempt solvent, meets all federal (USA) standards for health and environmental safety
Basic Use
EternaPrime is used to prepare surfaces for application of all EternaBond tapes. Recommended uses include, but are not limited to dirty surfaces which are difficult to clean completely (tar and gravel), potentially loose surfaces (mortar), porous surfaces (wood or concrete), and anytime the EternaBond tape is applied at temperatures below 40°F ambient.
Composition
EternaPrime is based on a VOC exempt solvent with a blend of our elastomers and resins infused into the solvent.
Technical Data
| Application temperature | -20°Fto 205°F |
| Coverage | 75 sq ft (6.9mtrs)per 1 quart (950mls) |
| Drying Time at 60°F | 15 minutes |
| Film Thickness | +/- 4 mils when wet |
| Flash Point | 110°F |
| Standard Can Size | Quart (950ml) |
| Viscosity | 135 - 152 cps |
| Weight | 10 lbs per gallon |
Surface Preparation
Surface must be dry. Remove heavy accumulations of loose rust and scale, dust, talc, and dirt. Oil, grease, and other contaminants should be removed with EternaClean or a non-residue cleaner. Do not use EternaPrime on PVC roofs as reactivation of some plasticizers may occur
Application
EternaPrime can be sprayed, rolled, or brushed onto surface (stir frequently)
